Someone recently asked, 鈥淲hy a longer rod?鈥澛� Someone else answered, 鈥淟onger dwell time.鈥澛� I never really thought about it before, so I thought I鈥檇 look into it.聽 Using some basic math, we can prove that a longer rod does indeed create a longer dwell time around top dead center.
As you can see in the diagram, the piston with the longer conrod spends more time around top dead center (0 degree crank angle) due to a slower acceleration rate towards and away from TDC.聽 A longer dwell time around top dead center makes better use of the combustion pressure and turning the pressure into torque; a rule of thumb is that you want peak combustion pressure around 15-17 degrees after聽TDC.聽 Furthermore, the combusiton pressures are higher while the crank angle is聽lower resulting in less side loading of the piston into the bore.聽 Less side loading results in less friction between the聽piston and bore freeing up power and reducing wear.聽 The reduced piston acceleration also improves piston ring life as the lower聽acceleration equals less force on the rings (remember F=ma?).
ReadRelated Articles
Chevy unveils 1,250-horsepower Corvette hypercar
RAM to return to NASCAR Trucks in 2026
Toyota exec says next gen Celica project is in development
HEMI V8s dominate 2026 Dodge Durango lineup
Bentley unveils a Bentayga with a drift mode
BMW unveils 523-horsepower M2 CS
